Part number: (1ML805903)
First off you will need to cut all the clips off the top (these clips would push into the underside of the Leon's bumper to secure it, as the ibize does not have these they need to be removed.
Hold the splitter up to the underside of the bumper ensuring that it is centered and then hold it in place with some masking tape.
With a pencil mark on each side how much the splitter overhangs and then cut the excess off, will be a good few inches both sides.
Using black self taping screws secure the splitter into place by screwing through the splitter and then into the underside of the bumper, pilot the holes first for greater accuracy. The best screws to us would be 30-40mm self taping screws (black).
Place a screw roughly every 4 inches to ensure tight fastening and so that gaps do not appear between the splitter and the bumper.
Fully Fitted
